Leather Loop Unclips With Press Stud

Measure the width of your belt or bag strap and select desired Colour Combination and Belt / Strap Width the Loop/ Keeper is intended for.

We will then make a loop with a circumference that will accommodate the width of the belt / bag strap you have selected. i.e. If you select ’40mm’ we will make a loop to fit a 40mm wide Belt or Bag Strap.

N.B. The sizes we provide are not the diameter of the loop.

Loop diameters are always larger than the belt width as they must be able to slide over two layers of the belt /strap and must also accommodate the width of the belt or strap it is intended for.

——-

We use Millimeters to describe belt / strap widths but if you require the size in Inches then we have given a rounded approximation below to help you visualize the sizes we use.

Millimeters To Inches (rounded to nearest 1/16 of inch):

10mm = 3/8 inch
12mm = 1/2 inch
15mm = 5/8 inch
20mm = 3/4 inch
22mm = 7/8 inch
25mm = 1 inch
28mm = 1 1/8 inch
30mm = 1 3/16 inch
32mm = 1 1/4 inch
35mm = 1 3/8 inch
38mm = 1 1/2 inch
40mm = 1 9/16 inch
45mm = 1 3/4 inch
50mm = 2 inch
55mm = 2 3/16 inch
60mm = 2 3/8 inch

Dimensions we use to make our loops
—————————————————-

1. LOOPS/ KEEPERS Made for Belts and Straps 30mm (1 3/16″) Wide and Over:

Loops made for belt and bags straps that are 30mm (1 3/16″) wide and over are made to accommodate two layers of leather that are approximately 3.5 – 4mm thick for each layer i.e. a total of approximately 7-8mm thick for two layers.

2. LOOPS/ KEEPERS Made for Belts and Straps Under 30mm (1 3/16″):

Loops made for belt and bags straps that are under 30mm wide are made to accommodate two layers of leather that are approximately 3 mm thick for each layer i.e. a total of approximately 6mm thick for two layers.

—

We use the above measurements as we have found them to be the average size for most belts and bag straps.

If your belt or strap differs to the average measurements we use to make our loops or you require a loop to accommodate more or less than two belt / strap layers then you may need to size up or down to allow for this difference.

Alternatively please contact us if you require a custom size and we can provide a price for this service.

N.B. Customized products are non-returnable as they are made to your specification and cannot be resold as a standard product.

———————

The width of the leather strips that we use to form the loops are as follows:

Loops made to fit belts that are 10mm – 25mm Wide – The Leather strips that we use to form the loops are 10mm wide.

Loops made to fit belts that are 28mm -35mm Wide – The Leather strips that we use to form the loops are 12mm wide.

Loops made to fit belts that are 38mm Wide and above – The Leather strips that we use to form the loops are 16mm wide.

i.e. The strips of leather are formed into loops and will accommodate the width of the belt selected from the drop down list. i.e. If you select 30mm we will make a loop to fit a 30mm wide belt and the strip of leather used to make this loop will be 12mm wide.

——————————

OTHER OPTIONS AND IMPORTANT INFORMATION PLEASE READ.

N.B. This loop is designed to unfasten with the press stud therefore we do not recommend using this loop to hang or attach articles from the loop in case the loop is pulled open. This loop is NOT intended for Pet collars or Pet accessories due to the fact it can be unfastened by your pet. Please see link below for loops we supply with a secure fixed rivet.

If you do not need the loop to unfasten and are able to slide the loop onto your belt or bag strap then we offer the option of a loop that has a fixed rivet which do not open and are therefore more secure – See Options below via the following links:

Plain Loop With Fixed Rivet Closure
Leather loop with Stitched Edge and Fixed Rivet Closure
——————————-

DETAILS REGARDING THE STRIPS OF LEATHER WE USE TO FORM THE LOOPS

The width of the leather strips that we use to form the loops are as follows:

Loops made to fit belts / bag straps that are 10mm – 25mm Wide – The Leather strips that we use to form the loops are 10mm wide.

Loops made to fit belts / bag straps that are 30mm -35mm Wide – The Leather strips that we use to form the loops are 12mm wide.

Loops made to fit belts / bag straps that are 38mm Wide and above – The Leather strips that we use to form the loops are 16mm wide.

i.e. The strips of leather are formed into loops and will accommodate the width of the belt / bag strap selected from the drop down list. i.e. If you select 30mm we will make a loop to fit a 30mm wide belt or bag strap and the strip of leather used to make this loop will be 12mm wide.